From 981be856dc37639a7cac187a1c4cc7ecb82c323f Mon Sep 17 00:00:00 2001
From: Georg Lukas <georg@op-co.de>
Date: Thu, 19 Mar 2009 13:41:59 +0100
Subject: removed unneeded junk

---
 INSTALL        |  236 --------------------------------------------------------
 src/start_awds |  132 -------------------------------
 src/stop_awds  |   17 ----
 3 files changed, 0 insertions(+), 385 deletions(-)
 delete mode 100644 INSTALL
 delete mode 100755 src/start_awds
 delete mode 100755 src/stop_awds

diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 23e5f25d0e5f85798dcfb368ecb2f04f59777f61..0000000000000000000000000000000000000000
--- a/INSTALL
+++ /dev/null
@@ -1,236 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
-
-     /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/src/start_awds b/src/start_awds
deleted file mode 100755
index 52d81a35503748c7ed3175be2064358acf7add26..0000000000000000000000000000000000000000
--- a/src/start_awds
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/bin/sh
-
-CONF_DIR=/usr/local/etc
-MODULES_DIR=/usr/local/lib/awds
-
-CONF_FILE=$CONF_DIR/awds.conf
-[ -e $CONF_FILE ] && . $CONF_FILE
-
-
-print_help()
-{
-echo "\
-use: $0 [options]
-where [options] is one or more of:
-  -i <if>	set the interface (ath0, wlan0, etc.)
-  -N		run in foreground
-  -v		verbose debug output
-  -p <prefix>	prepend <prefix> (e.g. 'strace', 'valgrind')"
-}
-
-
-PARAM_DEV=''
-PREFIX=''
-VERBOSE=''
-while [ $# -gt 0 ]; do
-  case "$1" in
-    -i) [ "$2" = "" ] && print_help && exit -1
-        PARAM_DEV=$2
-        shift 2
-        ;;
-    -N) DAEMONIZE="no"
-        shift
-        ;;
-    -v) VERBOSE="--verbose"
-        shift
-        ;;
-    -p) [ "$2" = "" ] && print_help && exit -1
-        PREFIX=$2
-        shift 2
-        ;;
-    -h) print_help
-        exit 0
-        ;;
-    *)  print_help
-        exit -1
-        ;;
-  esac
-done
-
-grep -q tun /proc/modules || find /lib/modules/$(uname -r) -name tun.*o -exec insmod {} \;
-
-# use this for early detection of wrong configured stack:
-export LD_BIND_NOW=1
-test -n "$LD_LIBRARY_PATH" && LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:
-export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}$MODULES_DIR
-
-# go to / to sanitize daemon and not block mounts
-cd /
-
-if [ $NET_DEV = auto ]
-then
-AUTODEV=$(grep -E -v "Inte|face" /proc/net/wireless | tr ":" " " | ( read a b; echo $a ) )
-else
-AUTODEV=$NET_DEV
-fi
-
-# argv1 can override the setting
-DEVICE=${PARAM_DEV:-$AUTODEV}
-
-AESCCM=''
-if [ x$USE_ENCRYPTION = xyes ]
-then
-AESCCM="aesccm.so -k $KEY_FILE"
-fi
-
-AWDS_SHELL=''
-[ "$USE_AWDS_SHELL" = yes ] && AWDS_SHELL='shell.so'
-
-AWDS_TOPO=''
-[ "$USE_TOPO_EXPORT" = yes ] && AWDS_TOPO='topowatch.so'
-
-AWDS_DAEMON=''
-PIDFILE=${PIDFILE:-/var/run/awds.pid}
-[ "$DAEMONIZE" = yes ] && AWDS_DAEMON="daemon.so --pidfile $PIDFILE"
-
-
-
-if [ "$DEV_CHANGE_WIRELESS_SETTINGS" = yes ]
-then
-    ifconfig $DEVICE down
-    iwconfig $DEVICE mode ad-hoc channel $DEV_WIRELESS_CHANNEL essid $DEV_WIRELESS_ESSID
-    ifconfig $DEVICE mtu 2000
-    ifconfig $DEVICE up
-
-    # madwifi bug workaround:
-    # set uapsd option to zero, if available
-    iwpriv $DEVICE 2>&1 | grep -q uapsd && iwpriv $DEVICE uapsd 0
-fi
-
-# Files in etc/awds.d/ or other scripts can utilize the AWDS_EXTENSIONS
-# environment variable to also load other gea modules when starting awds.
-if [ -d ${CONF_DIR}/awds.d ]
-then
-    FILES=$(find ${CONF_DIR}/awds.d/ -xtype f | sort )
-    for i in $FILES; do
-	source $i
-    done
-fi
-
-
-name="$HOSTNAME"
-[ -z "$name" -a -x /bin/hostname ] && name=$(/bin/hostname)
-[ -z "$name" -a -f /proc/sys/kernel/hostname ] && name=$(cat /proc/sys/kernel/hostname)
-
-# echo Starting AWDS on $DEVICE
-
-exec $PREFIX gea3_start -i <<END
-$AWDS_SHELL
-$AWDS_DAEMON
-rawbasic.so --raw-device $DEVICE
-awdsrouting.so --name $name $VERBOSE
-etxmetric.so
-pinger.so
-$AESCCM
-tapiface.so
-$AWDS_TOPO
-topolock.so
-$AWDS_EXTENSIONS
-spp.so
-remoteConfig.so
-testModul.so
-END
diff --git a/src/stop_awds b/src/stop_awds
deleted file mode 100755
index cc331d6d0f80414772ab7a533e3f355cdbcfc3be..0000000000000000000000000000000000000000
--- a/src/stop_awds
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-CONF_FILE=/usr/local/etc/awds.conf
-[ -e $CONF_FILE ] && . $CONF_FILE
-
-
-# use this for early detection of wrong configured stack:
-export LD_BIND_NOW=1
-test -n "$LD_LIBRARY_PATH" && LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:
-export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}/usr/local/lib/awds
-
-cd $(dirname $0)
-
-ACTION=--kill
-test "$1" = "--test" && ACTION=-t
-
-exec gea3_start daemon.so $ACTION --pidfile /var/run/awds.pid
-- 
1.6.2.1


